Takata Mini Instruction Manual download pdf (Page 59)

7. CARE AND MAINTENANCE

Removing the covers

Step 1 – Remove the shoulder straps

[MINI_038] To remove the covers, you must ﬁ rst

unhook the shoulder straps from the belt connection

section of the pull strap, on the bottom of the

TAKATA MINI.

[MINI_039] Then pull the shoulder straps entirely out

of the inner padding and shoulder pads.

NOTE!

You cannot pull the shoulder straps out of the inner

padding by only pulling at the shoulder pads.

Step 2 – Open the belt buckle

[MINI_040] Open the buckle, pull the tongues out,

and lay the shoulder straps out of the way.

Step 3 – Remove the inner padding

[MINI_041] Free the two side hooks from the back

plate, and pull the inner padding loose from the size

indicator. Set the adjustable inner padding to its

highest position, then pull the padding upwards, away

from the back plate.

Step 4 – Remove the side crash pads (AIRPADS)

WARNING!

The AIRPADS in the adjustable inner padding are not

washable and must be removed from the adjustable

inner padding before washing.

[MINI_042] To do this, lie the inner padding down,

with its front side on an even surface. You can then

reach into the back through the opening of the cover.

Remove the AIRPADS in the side wings of the

padding, as shown in the illustration.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 175 176

No comments

Takata Mini Instruction Manual Page 59